{ "currentVersion": 11.3, "cimVersion": "3.3.0", "serviceDescription": "
Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number (e.g., Blocks 3001, 3002, 3003 to 3999 in census tract 1210.02 belong to block group 3). Current block groups do not always maintain these same block number to block group relationships due to boundary and feature changes that occur throughout the decade. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the GEOID for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block GEOIDs are always built using the decennial geographic codes.<\/span><\/p> Block groups delineated for the 2020 Census generally contain 600 to 3,000 people. Local participants delineated most block groups as part of the Census Bureau's PSAP. The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant. <\/span><\/p> A block group usually covers a contiguous area. Each census tract contains one or more block groupsand block groups have unique numbers within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and AIANNH areas. <\/span><\/p> Block groups have a valid range of zero (0) through nine (9). Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.<\/span><\/p><\/div><\/div><\/div>",
"hasVersionedData": false,
"hasArchivedData": false,
"hasBranchVersionedData": false,
"supportsDisconnectedEditing": false,
"supportsDatumTransformation": true,
"supportsReturnServiceEditsOption": true,
"returnServiceEditsHaveSR": true,
"supportsQueryDataElements": true,
"datesInUnknownTimezone": false,
"supportsRelationshipsResource": true,
"syncEnabled": false,
"syncCapabilities": {
"supportsRegisterReplicaForServer": true,
"supportsSyncDirectionControl": true,
"supportsPerLayerSync": true,
"supportsPerReplicaSync": true,
"supportsAttachmentsSyncDirection": true,
"supportsSyncModelNone": true,
"supportsDurableUrlForSyncModelNone": false
},
"supportedExportFormats": "sqlite,filegdb,shapefile,csv,geojson",
"extractChangesCapabilities": {
"supportsReturnIdsOnly": false,
"supportsReturnExtentOnly": false,
"supportsReturnAttachments": false,
"supportsLayerQueries": false,
"supportsGeometry": false,
"supportsFeatureReturn": false,
"supportsReturnHasGeometryUpdates": false,
"supportsFieldsToCompare": false,
"supportsServerGens": false
},
"supportedQueryFormats": "JSON",
"maxRecordCount": 2000,
"maxRecordCountFactor": 1,
"capabilities": "Query,Extract",
"description": "Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number (e.g., Blocks 3001, 3002, 3003 to 3999 in census tract 1210.02 belong to block group 3). Current block groups do not always maintain these same block number to block group relationships due to boundary and feature changes that occur throughout the decade. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the GEOID for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block GEOIDs are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain 600 to 3,000 people. Local participants delineated most block groups as part of the Census Bureau's PSAP. The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant. A block group usually covers a contiguous area. Each census tract contains one or more block groupsand block groups have unique numbers within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and AIANNH areas. Block groups have a valid range of zero (0) through nine (9). Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.",
"copyrightText": "2021 TIGER - Line Shapefiles2021 TIGER - Line Shapefiles Technical DocumentationPrepared by the US Census Bureau, 2021",
"advancedEditingCapabilities": {
"supportsSplit": false,
"supportsReturnServiceEditsInSourceSR": true,
"supportsAsyncApplyEdits": true,
"supportsApplyEditsbyUploadID": true,
"supportedApplyEditsUploadIDFormats": "JSON",
"supportsMultipatchOptionForServiceEdits": true,
"supportedApplyEditsOptions": {"supportedEditingOptions": 0}
},
"spatialReference": {
"wkid": 103004,
"latestWkid": 6418,
"xyTolerance": 0.003280833333333333,
"zTolerance": 0.001,
"mTolerance": 0.001,
"falseX": -115211800,
"falseY": -93821500,
"xyUnits": 3048.0060960121928,
"falseZ": -100000,
"zUnits": 10000,
"falseM": -100000,
"mUnits": 10000
},
"initialExtent": {
"xmin": 6096181.634207636,
"ymin": 1758749.6338126105,
"xmax": 6461636.062746137,
"ymax": 2104034.435546096,
"spatialReference": {
"wkid": 103004,
"latestWkid": 6418,
"xyTolerance": 0.003280833333333333,
"zTolerance": 0.001,
"mTolerance": 0.001,
"falseX": -115211800,
"falseY": -93821500,
"xyUnits": 3048.0060960121928,
"falseZ": -100000,
"zUnits": 10000,
"falseM": -100000,
"mUnits": 10000
}
},
"fullExtent": {
"xmin": 6096181.634207636,
"ymin": 1788690.62667723,
"xmax": 6461636.062746137,
"ymax": 2074093.4426814765,
"spatialReference": {
"wkid": 103004,
"latestWkid": 6418,
"xyTolerance": 0.003280833333333333,
"zTolerance": 0.001,
"mTolerance": 0.001,
"falseX": -115211800,
"falseY": -93821500,
"xyUnits": 3048.0060960121928,
"falseZ": -100000,
"zUnits": 10000,
"falseM": -100000,
"mUnits": 10000
}
},
"allowGeometryUpdates": true,
"allowTrueCurvesUpdates": true,
"onlyAllowTrueCurveUpdatesByTrueCurveClients": true,
"supportsApplyEditsWithGlobalIds": false,
"supportsTrueCurve": true,
"units": "esriFeet",
"documentInfo": {
"Title": "US Census Block Groups 2020",
"Author": "",
"Comments": "Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number (e.g., Blocks 3001, 3002, 3003 to 3999 in census tract 1210.02 belong to block group 3). Current block groups do not always maintain these same block number to block group relationships due to boundary and feature changes that occur throughout the decade. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the GEOID for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block GEOIDs are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain 600 to 3,000 people. Local participants delineated most block groups as part of the Census Bureau's PSAP. The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant. A block group usually covers a contiguous area. Each census tract contains one or more block groupsand block groups have unique numbers within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and AIANNH areas. Block groups have a valid range of zero (0) through nine (9). Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.",
"Subject": "'US Census Block Groups 2020' may be used for demographic analysis, tabulation of data collected by the US Census Bureau, and other analysis that require the smallest the smallest geographical unit for which the bureau publishes sample data, i.e. data which is only collected from a fraction of all households. Typically, Block Groups have a population of 600 to 3,000 people.",
"Category": "",
"Keywords": "Census,Block Groups,2020,Sonoma County,Demographic,Population."
},
"supportsQueryDomains": true,
"supportsQueryContingentValues": true,
"layers": [
{
"id": 0,
"name": "US Census Block Groups 2020",
"parentLayerId": -1,
"defaultVisibility": true,
"subLayerIds": null,
"minScale": 0,
"maxScale": 0,
"type": "Feature Layer",
"geometryType": "esriGeometryPolygon"
}
],
"tables": [],
"relationships": [],
"enableZDefaults": false,
"allowUpdateWithoutMValues": false,
"supportsVCSProjection": true,
"referenceScale": 0,
"hasSharedTemplates": true
}